Technical information

Technician’s Handbook
80
Change Tenant Day/Night Service
CP Service <day>
CP Service <night1>
CP Service <night2>
To set the default (tenant group 1) to the specified day/night
service.
Changing the Baud Rate
BAUd <NNNN>
Sets the baud rate of the maintenance port. Available baud
rates are 300, 600, 1200, 2400, 3600, 4800, or 9600.
BAUd <NNNN> <port name>
Sets the baud rate of the specified port.
Change the baud rate of the system’s maintenance port.
Then, change the baud rate of the maintenance terminal.
Press [Ctrl] W to refresh the terminal screen.
Changing the Parity of a Console Port or DNIC Port
PARIty <XYZ> <port name>
Changes the parity of a console port or DNIC system port. X
= number of bits (7 or 8); Y = Parity (Odd, Even or None); Z
= number of stop bits (1 or 2). Example entry:
PARI 8E1 SS7PRI
This command will not work on port LPR2.
Refreshing the Terminal Screen
[Ctrl] W
If the screen doesn’t refresh, press [Ctrl] Q and [Ctrl] C.
Then enter [Ctrl] W again.