Technical information

Maintenance Commands
85
Maintenance
Commands
Troubleshooting Commands
Starting, Ending, and Printing a Session Log
SESsion Start
Begins a session log and stores it in
∗.maintenance.session_log
SESsion End
Ends a session log and stores it in
∗.maintenance.session_log.
PRInt ∗.MAINTENANCE.SESSION_LOG /PORT
<printer port>
Prints the log session at the specified printer port.
Showing Alarms
ALarms
Shows alarm information for all alarm categories.
SHow STatus ALarms
Shows alarm categories with raised alarms.
Showing Faults
SHow FAults ALarms
Lists the faults causing the alarms in all alarm categories.
SHow FAults <alarm category>
Lists the faults causing the alarms in the specified alarm
category.