Technical information

Maintenance Commands
89
Maintenance
Commands
Displaying the Call Path of a Set
RESOurces <plid>
Indicates the call path and destination device of the set at
the specified PLID.
RESOurces VIRTUAL <plid>
Used to specify MSDN/DPNSS virtual channels.
RESOurces XNET <trunk>
Used to display a device type of “XNET Trunk” representing
a trunk, set, or console used in an XNET call.
Reading Maintenance Logs
Four logs are available: Maintenance, Software, SMDR, and
Hotel/Motel.
LOGSys Read <log name> NEWest/OLDest <#>
Displays the specified number of newest or oldest entries in
the specified log.
LOGSys Read <log name> NEW/OLD <#> MAtch
"xxxx"
Searches the specified number of newest or oldest entries in
the log for the string xxxx.
LOGSys Read <log name> ALL MAtch "xxxx"
Searches all log entries in the specified log for those
containing the string xxxx.
LOGSys Read OTHER <log name> ALL MAtch
"xxxx"
Searches all log entries in the specified log on the other
plane for those containing the specified string.