User guide

32
SUPERCONSOLE 1000
®
User Guide
4. If you pressed [DEST], do one of the following:
• Press [O
VERRIDE] to break into the busy extension.
• Press [S
END MSG] to send a message waiting indication to the busy
extension.
• Press [S
OURCE] to connect to the Source party.
• Press [C
ALLBACK] to receive notification when the extension is free.
• Press Release to camp the source on to the destination again. (See
page 86 for an explanation of camp-on.)
• Press Cancel to clear the destination and dial a new extension
number.
Answering Intercepts to the Console
Misdialed calls from extensions, or calls to extensions with Do Not Disturb
activated, could ring the console depending on system programming.
When you answer the call, the display will show the reason for the
interception:
• DND INT for calls to an extension with Do Not Disturb activated.
• ILL # INT for illegal number dialed.
• VAC # INT for vacant (unassigned) number dialed.
Paging from the Console
TwoThree types of paging are available from the console: Public Address
(PA) Paging and Extension Paging Public Address (PA) Paging, Extension
Paging and Park and Paging.
PA Paging
If your system has external paging equipment, you can place a call on
hold, and then page for someone to pick up the call from the console Hold
slots. You can also use PA Paging to make public announcements.
Your paging equipment may be set up to access several areas or “zones.”
If so, you use the Page key to speak to all zones at once and access codes
to speak to individual zones. These codes are available from your
communications department.