User guide

Call Handling
33
To page someone to pick up a call on hold at the console:
1. Place the Source call on hold. (See page 28.)
2. Press and hold Page.
The lamp above the
Page key lights.
3. Do one of the following:
• If you have only one paging zone, announce the Hold Pickup
access code and the Hold slot number appearing on the top line of
the display.
• If you have more than one page zone, dial the two-digit paging code
(dial 00 for all zones), and then announce the Hold Pickup access
code and the Hold slot number.
• If any of the paging zones are busy, the display shows “Busy” on the
second line. Press [O
VERRIDE] to interrupt the page in progress.
4. Release Page.
Extension Paging
Extension Paging allows you to page extension users using their
telephone speakers. This feature is available only for paging telephones
that are programmed as key system telephones.
You can use Extension Paging to page a specific extension (Directed
Page), multiple extensions assigned to a group (Group Page), or all
extensions (All Set Page).
To page an extension:
1. Press Set Page.
2. Do one of the following:
• To page a specific extension, dial the extension number.
• To page a group of extensions, press [G
ROUP PAGE], and then
press the two-digit group number.
• To page all extensions, press [A
LL SET PAGE].
3. Make the page.