User guide

5330/5340 IP Phones – User Guide
111
Alerting Tones and LEDs
The cordless accessories provide the following alerting tones:
Feature Function
Mute key on cordless device ON/OFF 2-pitch tone occurs immediately. Reminder
tone occurs 30 seconds after activation and
then regularly until deactivated.
Mute key on Phone ON/OFF No immediate tone. Reminder tone occurs 30
seconds after activation and then regularly until
deactivated.
Low battery (within 10 minutes left) 3 beeps and 20 second pause repeated 3 times
Low battery (within 2 minutes left) 3 rapid beeps and 1.5 second pause repeated 3
times
Out of range Repetitive 3-pitch tone until you are back in
range. Note: If you are out of range for more
than 10 seconds, any call that is in progress is
dropped and not recovered.
Note: Audio indications are heard in the handset only when it is in use and may interrupt voice
transmission.
Cordless Handset LEDs
The handset has two LEDs:
• Blue – indicates the operational status of the handset
• Green – indicates the status of the electrical charge of the battery
LED
Color
LED State Indicates
Solid Handset is muted
Blinking Handset is in pairing mode
Winking Active audio path between Handset and Module
Blue
Off No audio path between Handset and Module OR
Battery is dead
Green Solid Battery is fully charged