USER GUIDE superset 4125 SX-200

-34-
Record a Call
This feature uses your voice mail system to record your telephone
conversations.
Note: You may be required by law to inform the other party that you are
recording the conversation. For specific instructions, consult your system
administrator.
To start recording while on a 2-party call:
z Press the Record Call key. (See Feature Keys elsewhere in this guide for
instructions on programming a Record Call key to your phone.)
Note: Your system may be programmed to automatically begin recording
external calls when you or the other answers.
To pause recording:
z Press the Pause softkey.
To resume recording after pausing:
z Press the Resume softkey.
To stop a recording without saving it:
z
Press the Erase softkey or the Cancel key.
To stop and save a recording:
z Press the Save softkey.
Putting the call on hold saves the recording; taking the call off hold starts a
new recording. Depending on system programming, hanging up, or pressing
TRANS/CONF or a DSS key, may also save the recording.
To listen to a recording:
1. Lift the handset.
2. Press the Record Call key. A call is place to your voice mail system.
3. Follow the prompts to retrieve the recording.