User's Guide IP Phone 5207

MITEL Networks 5207 IP Phone

User’s Guide

Rev. 012805

Call Forward

Call Forward lets you redirect incoming calls to an alternate number. ALWAYS

redirects all incoming calls regardless of the state of your telephone. B-INT

redirects internal calls when your telephone is busy, and B-EXT redirects

external calls when your telephone is busy. NA-INT redirects internal calls after

several rings if you don’t answer, and NA-EXT redirects external calls after

several rings if you don’t answer.

Note: For information about “I AM HERE”, see Call Forward – Remote

To program Call Forward:

1. Press SUPERKEY

2. Press # until “Call Forwarding?” appears

3. Press * for Yes

4. Press # until the type of Call Forward that you want to set up appears (see

above note).

5. Press * for Review

6. If a number is already programmed, press * for change

7. Press * to Program

8. Dial the destination number

9. Press to Save

10. Continue programming other types of Call Forward

–OR-

Press SUPERKEY to leave the programming mode

To turn Call Forward on and off (once it has been programmed)

1. Press SUPERKEY

2. Press # until “Call Forwarding?” appears

3. Press * for Yes

4. Do one of the following:

 To turn Call Forward ALWAYS on or off, press * for Review, press * for

Change and then press # to turn on or off

 To turn another type of Call Forward on or off, press # until you reach

the desired display. Press * for Review, press * for Change and then

press # to turn on or off.

5. Continue turning other types of Call Forward on or off

–OR-

Press SUPERKEY to leave the programming mode