IP Phone User Manual

-7-
MAKING AND ANSWERING CALLS
If your telephone system operates as a PBX, the Prime Line can be used for
both incoming and outgoing calls. Outgoing calls require dialing a line access
code (usually "9") followed by the telephone number.
In a key telephone system (KTS), the Prime Line is used for internal
(Intercom) calls only. Outgoing calls require the use of Line keys.
Make a Call - PBX
1. Lift the handset.
2. Dial the extension number or a line access code (usually "9") and the
telephone number for an outside call.
-OR-
Press a Speed Call key.
Make an External Call - KTS
1. Lift the handset.
2. Press a Line key.
3. Dial the telephone number.
-
OR
-
Press a Speed Call key.
-
OR
-
Press REDIAL.
Make an Intercom Call - KTS
An Intercom call is a call between two extensions, which either pages or
rings the called extension.
To switch between a ringing intercom call to a paged intercom call:
1. Make a call.
2. Do one of the following while listening to ringback tone:

Press the Direct Page feature key.

Dial *48.