IP Phone User Manual

-15-
Call Forward
Call Forward lets you redirect incoming calls to an alternate number.
"External Calls?" redirects your incoming external calls only; "Internal Calls?"
redirects your incoming internal calls only. If you want to redirect both
external and internal calls, you must program each separately.
"Always Forward?" redirects all incomin
g calls regardless of the state of your
telephone. "When No Answer?" redirects calls after several rings if you don't
answer. "When Set's Busy?" redirects calls when your telephone is busy.
"Busy/No Answer?" redirects calls when your telephone is busy or when you
don't answer.
Note: For information about "I'm Here?", see Call Forward - I'm Here.
To program Call Forward:
1. Press SUPERKEY.
2. Press # until "Call Forwarding?" appears.
3. Press * for Yes.
4. Do one of the following:
 To program external forwarding, press *.

To program internal forwarding, press # and press *.
5. Press # until the desired type of Call Forward appears.
6. Press * to program call forward.
7. Dial the destination number.
8. Press to save.
9. Press SUPERKEY to exit.
To turn Call Forward on and off (once it has been programmed):
1. Press SUPERKEY.
2. Press # until "Call Forwarding?" appears.
3. Press * for Yes.
4. Do one of the following:

To program external forwarding, press *.
 To program internal forwarding, press #.
5. To turn call forwarding on or off, press *, and then #.
6. Continue turning other types of call forwarding on or off or press
SUPERKEY to exit.