IP Phone User Manual

-16-
Call Forward (Enhanced)
Call Forward lets you redirect incoming calls to an alternate number.
"External Calls?" redirects your incoming external calls only; "Internal Calls?"
redirects your incoming internal calls only. If you want to redirect both
external and internal calls, you must program each separately.
"Always Forward?" redirects all incomin
g calls regardless of the state of your
telephone. "When No Answer?" redirects calls after several rings if you don't
answer. "When Set's Busy?" redirects calls when your telephone is busy.
"Busy/No Answer?" redirects calls when your telephone is busy or when you
don't answer.
Note: For information about the I'm Here? softkey, see Call Forward - I'm
Here.
To program Call Forward:
1. Press SUPERKEY.
2. Press the # until "Call Forwarding?" appears.
3. Press * for Yes.
4. Do one of the following:
 To program external forwarding, press *.

To program internal forwarding, press #.
An asterisk next to External Calls? or Internal Calls? indicates that al
least one type of call forwarding is turned on.
5. Press * to program Call Forward Always or # to program another type of
call forward, and then press * to begin programming.
6. Dial the destination number.
7. Press .
8. Continue programming other types of Call Forward or press SUPERKEY
to leave programming mode.