IP Phone User Manual

-1-

ABOUT YOUR PHONE

The 5215 IP Phone has ten fixed-function keys ( SUPERKEY, HOLD,

TRANS/CONF, CANCEL, REDIAL, SPEAKER, MESSAGE, MICROPHONE

and ) and seven personal keys with built-in status indicators. The

personal key on the bottom left is always your Prime Line; the remaining

personal keys can be programmed as:

Feature keys (for example, Swap ). You can program feature keys from

your phone. Your administrator can also program feature keys.

Speed Call keys. You can program speed call keys from your phone.

Line Appearances. Only the administrator can program line appearances.

Your telephone also features display-assisted selection of features, on-hook

dialing, and a large Message Indicator.

Note: When using the SUPERKEY, press Cancel to back up one menu

level.

IMPORTANT NOTE FOR HEADSET USERS:

Headsets with a feature control switch that are approved for use with the

5215 IP phone must be installed in the dedicated headset jack (the jack

nearest the front of the set). Installation will disable your handset

microphone. Disconnecting the headset at the jack or at the quick-

disconnect plug restores handset operation.