User guide

Mitel

Model 5330/5340 User Guide – Issue 2, October 2008 Page 47

Cordless Devices

You can use the cordless handset and cordless headset to move around within your office or

adjacent offices. The cordless headset and handset are optional accessories, ordered

separately. Both cordless devices connect to your endpoint through the cordless module, which

attaches to the back of the endpoint. The cordless headset rests and recharges in a headset

cradle that attaches to the side of the endpoint. The cordless handset recharges in the handset

cradle.

The Cordless Devices Application provides access to the configuration settings and information

screens that apply to the cordless module and accessories. For more information, see “Pairing

a Cordless Accessory with the Cordless Module” on page 49.

The cordless module is shown here. The endpoints features are explained below.

Feature Function

1 – Cordless Module Attached to the back of the endpoint, the module

contains a light-emitting diode (LED) indicating that

a cordless device is in use; also indicates the

pairing of module and a cordless device.

2 – Cordless Headset Cordless handsfree operation for calls. If you are

using the cordless headset, you do not need to use

the handset.

3 – Cordless Headset Charging Cradle Provides power to recharge the cordless headset

battery.

4 – Cordless Handset Charging Cover Provides power to recharge the cordless handset

battery. Replaces the cover supplied with the

endpoint for corded handsets.

5 – Cordless Handset Cordless operation for handset calls. (You can

transfer from the endpoint handset to the cordless

headset at any time.)