User guide

Mitel
®
Model 5330/5340 User Guide – Issue 2, October 2008 Page 53
Cordless Devices
Cordless Headset
The cordless headset offers the same capability as the cordless handset to make and answer
endpoint calls away from your desk, while adding the convenience of hands-free operation.
When not in use, the cordless headset sits in the headset charging cradle. For more information
on alerting tones and LEDs, see “Alerting Tones and LEDs” on page 50.
To use the cordless headset, you must pair the headset with the endpoint. For more information,
see “Pairing the Cordless Module and Devices” on page 49.
Cordless Headset Features
The cordless headset is shown here.
Answering Calls
To answer a call:
Do one of the following:
• Lift the cordless headset from the cradle.
• If the headset is already out of the cradle, press the hookswitch button on the
headset.
Hanging Up
If you are out of range for more than 10 seconds, any call that is in progress is dropped and not
recovered.
To hang up:
Do one of the following:
• Replace the cordless headset in the cradle.
• If the headset is already out of the cradle, press the hookswitch button on the
headset.
1 – Microphone 4 – Volume control
2 – Boom arm 5 – Hookswitch and pairing button
3 – Linked Indicator (LED)
2
41
3
5
1