User guide

Cordless Devices
Page 54 Mitel
®
Model 5330/5340 User Guide – Issue 2, October 2008
Cordless Headset LEDs
There are two LEDs associated with the cordless headset:
• Blue – Indicates the operational status of the headset
• Green – Indicates the status of the electrical charge of the battery
The handset is blinking, when the LED is on and off for an equal amount of time. The handset is
winking, when the LED is on for a short period of time and off for a longer period of time.
Led Color LED State Indicates
Blue (on
headset)
Solid Headset microphone is muted.
Blinking Headset is in pairing mode.
Winking Active audio path between Headset and
Module.
Solid for 2 seconds Indicates one of the following:
• Pairing successful
• New battery installed
Green (on
cradle)
Solid Battery is fully charged.
Blinking Battery is charging.
Winking Indicates low voltage when headset is
uncradled.
Off When headset is cradled, indicates battery is
not charging.