Cell Phone User Manual

ManualsBrandsMitel ManualsCell Phone5610

QUICK REFERENCE GUIDE

Part Number 57011425

Mitel

5610 IP DECT Cordless Handset

The Mitel 5610 Cordless Handset and IP DECT (Digital Enhanced Cordless

Telecommunications) Stand provides Mitel 5000 SIP call processing features on a

cordless handset. The IP DECT stand also provides conferencing, call transfer, and

other basic features between handsets.

Handset - Front View

Turn Handset On or Off

Press and hold key.

Handset - Side View

Signal Range

The cordless handset has an indoor

signal range of up to 150 feet (50

meters) from the IP DECT stand. This

range can be limited by concrete or

metal barriers. If you go out of range

and then return back into range, the

handset will display MISSED CALL.

# Front View - Description

Color display

Press  to navigate menus

and services

Press to make or answer calls

Use the keypad to enter numbers and

letters

Use in the name editor to capitalize

letters, type numbers, and enter the star

symbol

Earpiece

Press to enter main menu and

select and confirm options

Softkeys used for various functions

To hang up, exit a menu, and turn the

handset on or off, press .



Pound key

Microphone

# Side View - Description

Loudspeaker for speakerphone

Speakerphone activate and deactivate

key

Headset jack connector (2.5 mm)

Volume Up key

Volume Down key

Summary of content (5 pages)

PAGE 1
QUICK REFERENCE GUIDE Mitel® 5610 IP DECT Cordless Handset The Mitel 5610 Cordless Handset and IP DECT (Digital Enhanced Cordless Telecommunications) Stand provides Mitel 5000 SIP call processing features on a cordless handset. The IP DECT stand also provides conferencing, call transfer, and other basic features between handsets. Handset - Front View Turn Handset On or Off Press and hold Handset - Side View key.
PAGE 2
QUICK REFERENCE GUIDE Handset Display - Idle Mode Handset Display Main Menu Enter Main Menu From Idle mode, press Add a Contact . Select a Menu Option keys to select a menu option. 1. Press the 2. Press . 3. Press BACK to exit a menu.
PAGE 3
QUICK REFERENCE GUIDE Call Swap Listen to Voice Mail Message Call swap lets you alternate between two calls. Each call is private; neither person can overhear your conversation with the other. If a message is left in your voice mailbox, MISSED CALL and then NEW VOICEMAIL appears in the handset display. A small envelope icon is displayed at the top of the main display. 1. While on a call, press HOLD. 2. Enter the number of the second party that you want to call and press . 3.
PAGE 4
QUICK REFERENCE GUIDE Check Call Log Remove Belt Clip Cover 1. From idle mode, press CALL LOG. Use the belt clip removal tool. Insert the tool between the belt clip cover and the phone.Then, using your thumb, press down and slide the clip up and off the back of the phone. 2. Select the type of calls: Missed, Incoming, Outgoing, or All Calls. 3. Select the call. 4. Press . About Feature Access Codes You can dial feature access codes for Emergency Calls (911 U.S.
PAGE 5
QUICK REFERENCE GUIDE Troubleshooting Symptom Possible Cause Corrective Action Unable to remove belt You are not inserting the removal Insert the removal tool as shown clip cover using removal tool far enough into the opening in the graphic on the previous page. between the handset and clip tool. cover. Handset display is black. Handset does not charge. Handset is in power saving mode. Press any key. Battery is drained. Put handset in charging cradle to recharge battery.