Installation guide

Additional Information
14 RN-001039-00 REV00 – 10.2014
BroadSoft XSI Speed Dial 8 Support
Release 4.0.0 introduces interoperability support for the BroadSoft XSI Speed Dial 8
service for the 6867i and 6869i IP phones. When the respective speed dial information
is configured on the BroadSoft BroadWorks call manager and the phone is configured
for XSI interoperability, users can simply place an outgoing call to a speed dial number
by pressing the Speed Dial 8 softkey and then pressing and holding the correspond-
ing speed dial key on the dialpad. Alternatively, users can select the desired number
using the navigation keys and then press the Dial softkey,
button, Line button,
button, or simply pick up the handset.
After configuring the desired speed dial information using the Xtended Services Plat-
form, Administrators must enable basic XSI interoperability on the phone by defining
the following XSI credential parameters:
• xsi user name
• xsi ip
• xsi port
• xsi protocol
Note:
Please refer to the respective Xtended Services Platform documentation for infor-
mation on how to configure the Speed Dial 8 service on the BroadSoft BroadWorks
call manager.
6869i Example: Speed Dial 8 Menu