Installation guide

Additional Information
RN-001039-00 REV00 – 10.2014 15
Then, to specifically enable the Speed Dial 8 service, Administrators must define the
“xsi speeddial8 enabled” parameter in the respective configuration file and users
must enter in their username (if required) and password on the phone through the
Options > Credentials menu.
Lastly, a Speed Dial 8 softkey should be configured for easy access to the Speed Dial 8
menu. Users and Administrators can configure a Speed Dial 8 softkey using the Web
UI, selecting a top or bottom softkey, changing the type to “Speeddial” and then
entering “xsi.speeddial8” in the Value field.
Administrators also have the added option of configuring a Speed Dial 8 softkey by
defining the “softkeyN type” or “topsoftkeyN type” parameter as “speeddial” and
“softkeyN value” or “topsoftkeyN value” to “xsi.speeddial8” in the respective config-
uration file.
Enabling XSI Speed Dial 8 Support Using the Configuration Files
Use the following parameters to enable XSI Speed Dial 8 support.
Note:
Passwords cannot be defined in the configuration files.
Note:
Speed Dial 8 softkey Label and Line values are optional.
Parameter –
xsi user name
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the user name used for authentication of the XSI account.
Format <username>@<server>
Default Value N/A
Range N/A
Example xsi user name: [e-mail]