Installation guide

Additional Information
24 RN-001039-00 REV00 – 10.2014
Entering Usernames/Passwords and Connection Testing
Before the BroadSoft XSI Call Log service can be utilized, user credentials (i.e. user-
name and password) for BroadSoft XSI will need to be entered using the phone’s UI by
navigating to the Options > Credentials menu. This menu also allows users to test their
connection to the XSI server.
Use the following procedure on the phone’s UI to enter user credentials and test the
connection to the XSI server.
Parameter
xsi port
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the port used for communicating with the XSI server.
Format Integer
Default Value 80 (when protocol used is HTTP)
443 (when protocol used is HTTPs)
Range Any valid port
Example xsi port: 8080
Parameter
xsi calllogs enabled
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables XSI Call Log functionality.
Format Boolean
Default Value 0 (Disabled)
Range 0 (Disabled)
1 (Enabled)
Example xsi calllogs enabled: 1
1. Press on the phone to enter the Options List.
2. Navigate to the Credentials option and press the button or Select softkey.