Installation guide

Additional Information
RN-001039-00 REV00 – 10.2014 31
Entering Usernames/Passwords and Connection Testing
Before a specific Directory can be loaded, user credentials (i.e. username and pass-
word) for each respective external Directory source will need to be entered using the
phone’s UI by navigating to the Options > Credentials menu. For the 6867i and 6869i,
this menu also allows users to test their connection to the external Directory source.
Use the following procedure on the phone’s UI to enter user credentials and (for the
6867i and 6869i) test the connection to an external directory source.
6863i and 6865i
Note:
Administrators may define a username and password in the “ ldap server ” configu-
ration parameter. In such cases, a username and password does not have to be
entered by the user. The fields under the LDAP tab will indicate that it already con-
tains Administrator-defined credentials. If a username and password are entered by
the user, the user-entered credentials take precendence over those defined by the
Administrator.
1. Press on the phone to enter the Options List.
2. Select Credentials.
3. Use the 5 and 2 keys to navigate to the desired Directory source and select 4 Enter.
4. Press the 2 key to navigate to the Enter Username screen and select 4 Enter.
5. Using the dialpad keys, enter in your username and select 4 Set.
Note:
The 3 key can be used to perform a backspace.
6. Press the 2 key to navigate to the Enter Password screen and select 4 Enter.
7. Using the dialpad keys, enter in your password and press the button or select 4 Set.
Note:
The 3 key can be used to perform a backspace.