Installation guide

Additional Information
RN-001039-00 REV00 – 10.2014 35
Directory Search Dynamic Threshold (6867i and 6869i Only)
As detailed in the previous section, for the 6867i and 6869i contacts are listed and
updated dynamically on screen depending on the letters that are entered into the
search field. This dynamic update is dependant on the “directory search dynamic
threshold” configuration parameter. This parameter indicates the threshold value
where the Directory search is no longer dynamic. By default, the search dynamic
threshold is limited to 5000 entries That is, if any enabled Directory source holds more
records than the configured value, users will need to manually press a Search softkey
in order to trigger the search.
Configuring the Directory Search Dynamic Threshold Using the Configuration Files
Use the following parameter to configure the Directory search dynamic threshold.
Parameter –
directory search dynamic
threshold
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the threshold value where the contact search is no
longer dynamic (for the 6867i and 6869i). If any enabled Directory
source holds more entries than the configured value, the user must
manually press the Search softkey in order to trigger the search.
Format Integer
Default Value 5000
Range 0 - 1000000
Example directory search dynamic threshold: 1000