Installation guide

Additional Information
56 RN-001039-00 REV00 – 10.2014
Parameter –
exchange contacts resync time
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the time of day in a 24-hour period for the IP phone to update
the Microsoft Exchange directory.
This parameter works with TFTP, FTP, HTTP and HTTPS servers.
Notes:
• The resync time is based on the local time of the IP phone.
• The value of 00:00 is 12:00 A.M.
• When entering a value for this parameter using the configuration
files, the value can be entered using minute values from 00 to 59 (for
example, the auto resync time can be entered as 02:56).
• Resync adds up to 15 minutes random time to the configured time.
For example, if the resync time parameter is set to 02:00, the event
takes place any time between 02:00 and 02:15.
• When the language on the phone is set to French or Spanish, you
must enter the time in the format "00h00" (configuration files only).
Format hh:mm
00h00 (for French and Spanish configuration files)
Default Value 02:00
Range hh = 00 to 23
mm = 00 to 59
Example exchange contacts resync time: 03:24
Parameter –
exchange contacts resync days
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Specifies the amount of days that the phone waits between
Microsoft Exchange directory resync operations.
Note:
A value of 0 causes the phone to checksync every time the clock reads
the proper time. A value of 1 forces the phone to wait 24 hours prior to
doing the first checksync.
Format Integer
Default Value 0
Range 0-364
Example exchange contacts resync days: 1