Installation guide

Additional Information
86 RN-001039-00 REV00 – 10.2014
Creating a Login Key Using the Phone’s Web UI
Use the following procedure to create a Login key using the phone’s Web UI:
Logging In and Out of Your User Profile Using the Phone UI
6863i and 6865i
1. Click on Operation > Programmable Keys (6863i/6865i) or Softkeys and XML
(6867i/6869i)
2. Select from Key 1 through Key 3 (6863i) or Key 8 (6865i) on the programmable keys
or
Select from Key 1 through Key 20 (6867i) or Key 44 (6869i) on the top keys
or
Select from Key 1 through Key 18 (6867i) or Key 24 (6869i) on the bottom keys.
3. In the Type field, select Login to apply to the key.
4. (If available/optional) In the Label field, enter a label to apply to this key (e.g. Login)
5. Click Save Settings.
1. Press the key configured with Login functionality.
2. At the “Please Enter User ID:” prompt, enter in your username using the dialpad keys.
3. If applicable, press the 2 Next key to navigate to the “Please Enter Password:” prompt and
enter in your password using the dialpad keys.
4. Press the 4 Submit key.
Your profile should now be loaded.
5. To log out, press the key configured with Login functionality again, enter in your password
(if applicable), and press the Submit 4 softkey.
The phone should revert back to the generic Visitor profile.