AASTRA 6867I - User Manual
Table Of Contents
- Software License Agreement
- Welcome
- IP Phone Keys
- Getting Started
- Methods of Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line and Call Appearances
- Presence Key
- Configuring Softkeys
- State-Based Softkeys
- Softkey Display Behavior
- Line Key
- Speed Dial Key
- Speed Dial Prefix
- Press-and-Hold to Create a Speed Dial (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Key Using the Speed Dial Edit Option (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Softkey Using the Mitel Web UI
- Creating Dialpad Speed Dial Keys Using the Mitel Web UI
- Do Not Disturb (DND) Key
- Busy Lamp Field (BLF) Key
- BLF/List Key
- Automatic Call Distribution (ACD) Key (for Sylantro Call Managers)
- XML Key
- Flash Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return Key
- Call Forward Key
- BLF/Xfer
- Speed Dial/Xfer
- Speed Dial/Conf
- Speed Dial/MWI
- Directory Key
- Callers List Key
- Redial Key
- Conference Key
- Transfer Key
- Intercom Key
- Phone Lock Key
- Paging Key
- Discreet Ringing Key
- Empty Key
- None Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Additional Features
- Display DTMF Digits
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Switch UI Focus to Ringing Line
- Call Hold Reminder During Active Calls
- Call Hold Reminder (on single hold)
- Call Waiting Tone Period
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- Message Waiting Indicator
- Incoming Intercom Call Features
- Group RTP Paging
- Shared Call Appearance (SCA) Call Bridging
- BroadSoft BroadWorks Executive and Assistant Services
- Star Codes
- Other Features
- Model M680i and M685i Expansion Modules
- Troubleshooting Solutions
- Why is my display blank?
- Why is my speakerphone not working?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new voicemail message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the No Service message?
- How do I change my user password?
- Why does my phone display Bad Encrypted Config?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Limited Warranty (Australia Only)
- Appendix A - Time Zone Codes
Mitel 6867i SIP Phone Release 4.1.0 SP3 User Guide
108
BLF/XFER
The BLF key allows one or more extensions to be monitored, and once there is any state
change with those extensions, the key shows the status of the monitored lines. The Transfer
key allows a call to be transferred to other recipients blindly or consultatively. The BLF/Xfer
key combines the BLF and Transfer keys' functionality together allowing the user to transfer
calls or use BLF with one key.
BLF/XFER KEY REQUIREMENTS AND FUNCTIONALITY
• BLF/Xfer and BLF: A BLF/Xfer key can be configured for subscribing to an extension and
monitor the status of the extension, similar to the BLF key functionality. Changes of the
state of the monitored extension are indicated by the key’s graphical button image as well
as the key’s LED.
• BLF/Xfer and Blind Transfer Calls: When the focused line is in the connected state, pressing
the BLF/Xfer key transfers the call to the extension unconditionally, disregarding the status
of the monitored extension.
If transferring a call to an extension fails, a message Transfer Failed displays on the phone,
and you can reconnect the call (get the call back) by pressing the line key again.
• BLF/Xfer and Call Forward: When the focused line is in the ringing state, pressing the
BLF/Xfer key forwards the call to the extension unconditionally, disregarding the status of
the monitored extension.
• BLF/Xfer and Speed Dial: When the focused line and the monitored extension are idle,
pressing the BLF/Xfer key causes the phone to go offhook and dial the number of the
extension.
Note: BLF/Xfer functionality can only be programmed on the left softkeys.
Note: It is recommended that you enable the Switch UI Focus to Ringing Line
parameter when using the BLF/Xfer feature. For more information about this parameter,
see “Switch UI Focus to Ringing Line” on page 194.