AASTRA 6867I - User Manual

Mitel 6867i SIP Phone Release 4.1.0 SP3 User Guide
136
USING INTERCOM FUNCTIONALITY
On the 6867i you can use the Icom key to automatically connect with a remote extension.
USING THE ICOM KEY
1. Press the Icom key.
2. If no number was defined when configuring the key, enter the extension number of the
person you want to intercom.
3. After a beep tone, your phone automatically connects with the remote extension and you
can speak through its speaker.
4. To cancel the intercom, press or the Cancel key.
5. When you are finished speaking, hang up the phone by placing the handset back on-hook
or by pressing or the line/call appearance button for the active call. When you
hang up, the remote phone also hangs up.
You can set specific incoming Intercom call features on the 6867i IP phone using the Mitel Web
UI. The following table describes these features.
IP PHONE UI
INCOMING INTERCOM
FEATURES IN MITEL WEB UI DESCRIPTION
Microphone Mute Allows you to enable or disable the microphone on the IP phone
for Intercom calls made by the originating caller.
Auto Answer Allows you to enable or disable the IP phone to automatically
answer an Intercom call. If auto-answer is enabled on the IP
phone, the phone plays a tone (if Play Warning Tone is enabled)
to alert the user before answering the intercom call. If auto-answer
is disabled, the phone treats the incoming intercom call as a
normal call.
Play Warning Tone Allows you to enable or disable a warning tone to play when the
phone receives an incoming intercom call on an active line.
Allow Barge In Allows you to enable or disable how the phone handles incoming
intercom calls while the phone is on an active call.
Note: For more information about the incoming Intercom features and for procedures
on setting these features, see “Incoming Intercom Call Features” on page 202.