AASTRA 6867I - User Manual
Table Of Contents
- Software License Agreement
- Welcome
- IP Phone Keys
- Getting Started
- Methods of Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line and Call Appearances
- Presence Key
- Configuring Softkeys
- State-Based Softkeys
- Softkey Display Behavior
- Line Key
- Speed Dial Key
- Speed Dial Prefix
- Press-and-Hold to Create a Speed Dial (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Key Using the Speed Dial Edit Option (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Softkey Using the Mitel Web UI
- Creating Dialpad Speed Dial Keys Using the Mitel Web UI
- Do Not Disturb (DND) Key
- Busy Lamp Field (BLF) Key
- BLF/List Key
- Automatic Call Distribution (ACD) Key (for Sylantro Call Managers)
- XML Key
- Flash Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return Key
- Call Forward Key
- BLF/Xfer
- Speed Dial/Xfer
- Speed Dial/Conf
- Speed Dial/MWI
- Directory Key
- Callers List Key
- Redial Key
- Conference Key
- Transfer Key
- Intercom Key
- Phone Lock Key
- Paging Key
- Discreet Ringing Key
- Empty Key
- None Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Additional Features
- Display DTMF Digits
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Switch UI Focus to Ringing Line
- Call Hold Reminder During Active Calls
- Call Hold Reminder (on single hold)
- Call Waiting Tone Period
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- Message Waiting Indicator
- Incoming Intercom Call Features
- Group RTP Paging
- Shared Call Appearance (SCA) Call Bridging
- BroadSoft BroadWorks Executive and Assistant Services
- Star Codes
- Other Features
- Model M680i and M685i Expansion Modules
- Troubleshooting Solutions
- Why is my display blank?
- Why is my speakerphone not working?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new voicemail message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the No Service message?
- How do I change my user password?
- Why does my phone display Bad Encrypted Config?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Limited Warranty (Australia Only)
- Appendix A - Time Zone Codes
Managing Calls
179
4. Click on Basic Settings > Account Configuration.
5. For each account, enable DND by placing a check mark in the box. Disable DND by
unchecking the box.
6. Click Save Settings.
The changes takes affect immediately without a reboot.
CONFIGURING DND MODES USING THE IP PHONE UI
After you add a DND key to your phone, you can toggle the DND state using this key on the
phone. Use the following procedure to enable/disable DND on the IP phone.
The following procedures assume you have already configured a DND key AND assumes there
are multiple accounts configured on the phone.
DND in Account Mode
1. From the Home screen press the 4 navigation key to move to the Line Selection screen.
2. Highlight the desired account using the 2 and 5 navigation keys.
3. Press the 3 navigation key to go back to the Home screen
4. With the account in focus on Home screen, press the DND softkey to toggle DND on or
off for the account.
Notes:
1. If you selected Account or Custom mode in Step 2, you can enable/disable each
account or all accounts as applicable. If you selected Phone mode, the first account
allows you to change the DND status for all accounts.
2. Number and name of accounts that display to this screen are dependent on the
number and name of accounts configured on the phone. Only your Administrator
can create accounts for your phone. Contact your Administrator for more information.
IP PHONE UI