AASTRA 6867I - User Manual

Managing Calls
183
All On, All Off, or copy the configuration for the account in focus to all other accounts
using a CopytoAll softkey.
3. Click Save Settings.
The changes takes affect immediately without a reboot.
4. Click on Basic Settings > Account Configuration.
The illustration above shows 2 accounts configured on the phone. Accounts must be set
up by your System Administrator.
5. For each account, enable the Call Forward state by placing a check mark in one or more
of the following State fields:
• All
• Busy
• No Answer
The All option forwards all incoming calls for this account to the specified phone number
regardless of the state of the phone. The phone can be in the Busy or No Answer states,
or can be in the idle state. The phone still forwards all calls to the specified number.
The Busy option call forwards incoming calls only if the account is in the busy state. The
calls are forwarded to the specified phone number.
Note: If there is only one account configured on the phone, then the mode setting
is ignored and the phone behaves as if the mode was set to Phone.
Note: If the BroadSoft BroadWorks Executive and Assistant Services feature is
enabled and your phone is configured with the Assistant’s role, an additional Forward
Filtering option may be available on the Account Configuration page. For information
on the BroadWorks Executive and Assistant Services feature, refer to BroadSoft
BroadWorks Executive and Assistant Services on page 208.