AASTRA 6867I - User Manual
Table Of Contents
- Software License Agreement
- Welcome
- IP Phone Keys
- Getting Started
- Methods of Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line and Call Appearances
- Presence Key
- Configuring Softkeys
- State-Based Softkeys
- Softkey Display Behavior
- Line Key
- Speed Dial Key
- Speed Dial Prefix
- Press-and-Hold to Create a Speed Dial (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Key Using the Speed Dial Edit Option (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Softkey Using the Mitel Web UI
- Creating Dialpad Speed Dial Keys Using the Mitel Web UI
- Do Not Disturb (DND) Key
- Busy Lamp Field (BLF) Key
- BLF/List Key
- Automatic Call Distribution (ACD) Key (for Sylantro Call Managers)
- XML Key
- Flash Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return Key
- Call Forward Key
- BLF/Xfer
- Speed Dial/Xfer
- Speed Dial/Conf
- Speed Dial/MWI
- Directory Key
- Callers List Key
- Redial Key
- Conference Key
- Transfer Key
- Intercom Key
- Phone Lock Key
- Paging Key
- Discreet Ringing Key
- Empty Key
- None Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Additional Features
- Display DTMF Digits
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Switch UI Focus to Ringing Line
- Call Hold Reminder During Active Calls
- Call Hold Reminder (on single hold)
- Call Waiting Tone Period
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- Message Waiting Indicator
- Incoming Intercom Call Features
- Group RTP Paging
- Shared Call Appearance (SCA) Call Bridging
- BroadSoft BroadWorks Executive and Assistant Services
- Star Codes
- Other Features
- Model M680i and M685i Expansion Modules
- Troubleshooting Solutions
- Why is my display blank?
- Why is my speakerphone not working?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new voicemail message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the No Service message?
- How do I change my user password?
- Why does my phone display Bad Encrypted Config?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Limited Warranty (Australia Only)
- Appendix A - Time Zone Codes
Mitel 6867i SIP Phone Release 4.1.0 SP3 User Guide
184
The No Answer option call forwards incoming calls only if the account rings but is not
answered in the defined number of rings. The call gets forwarded to the specified number.
6. For each account, in the Value field, enter the phone number for which you want the
incoming calls to forward to if the phone is in the specified state.
If using the Account mode or Custom mode, you can enter different phone numbers for
each account.
7. For the No Answer state, in the No. Rings field, enter the number of times that the account
rings before forwarding the call to the specified number. Valid values are 1 through 20.
Default is 1.
8. When using the Account mode or Custom mode, you can enter a different number of rings
for each account. If you use the Mitel Web UI to change the Call Forward Key Mode to
Phone, all accounts synchronize to Account 1.
9. Click Save Settings.
The changes takes affect immediately without a reboot.
Note: You can use the Busy and No Answer states together using different forwarding
phone numbers. If these states are enabled for an account (the All state is disabled),
and the phone is in the busy state when a call comes in, the phone can forward the call
to the specified phone number (for example, voicemail). If there is no answer on the
phone after the specified number of rings, the phone can forward the call to a different
specified number, such as a cell phone number.
Notes:
1. If you selected Account mode in Step 5, you can enable/disable each account or all
accounts as applicable. You can enter different phone number for each enabled
state.
2. If you selected Custom mode, you can enable/disable each account or all accounts
as applicable. You can enter different phone numbers for each enabled state.
3. If you selected Phone mode, all accounts are set to the same Call Forward
configuration (All, Busy, and/or No Answer) as Account 1 on the phone. In the Mitel
Web UI, only Account 1 is enabled. All other accounts are grayed out but use the
same configuration as Account 1.
4. Using the Mitel Web UI, if you make changes to Account 1, the changes apply to all
accounts on the phone. Using the IP phone UI, if you make changes to any other
account other then Account 1, the changes also apply to all accounts on the phone.
When enabling a Call Forward state, you must specify a phone number for the phone
to Call Forward to. The number you specify applies to all accounts of the same mode.
5. Number and name of accounts that display to this screen are dependent on the
number and name of accounts configured on the phone. The name for the account
is specified by your System Administrator. Contact your System Administrator for
more information.