AASTRA 6867I - User Manual
Table Of Contents
- Software License Agreement
- Welcome
- IP Phone Keys
- Getting Started
- Methods of Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line and Call Appearances
- Presence Key
- Configuring Softkeys
- State-Based Softkeys
- Softkey Display Behavior
- Line Key
- Speed Dial Key
- Speed Dial Prefix
- Press-and-Hold to Create a Speed Dial (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Key Using the Speed Dial Edit Option (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Softkey Using the Mitel Web UI
- Creating Dialpad Speed Dial Keys Using the Mitel Web UI
- Do Not Disturb (DND) Key
- Busy Lamp Field (BLF) Key
- BLF/List Key
- Automatic Call Distribution (ACD) Key (for Sylantro Call Managers)
- XML Key
- Flash Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return Key
- Call Forward Key
- BLF/Xfer
- Speed Dial/Xfer
- Speed Dial/Conf
- Speed Dial/MWI
- Directory Key
- Callers List Key
- Redial Key
- Conference Key
- Transfer Key
- Intercom Key
- Phone Lock Key
- Paging Key
- Discreet Ringing Key
- Empty Key
- None Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Additional Features
- Display DTMF Digits
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Switch UI Focus to Ringing Line
- Call Hold Reminder During Active Calls
- Call Hold Reminder (on single hold)
- Call Waiting Tone Period
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- Message Waiting Indicator
- Incoming Intercom Call Features
- Group RTP Paging
- Shared Call Appearance (SCA) Call Bridging
- BroadSoft BroadWorks Executive and Assistant Services
- Star Codes
- Other Features
- Model M680i and M685i Expansion Modules
- Troubleshooting Solutions
- Why is my display blank?
- Why is my speakerphone not working?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new voicemail message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the No Service message?
- How do I change my user password?
- Why does my phone display Bad Encrypted Config?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Limited Warranty (Australia Only)
- Appendix A - Time Zone Codes
Additional Features
193
STATUS SCROLL DELAY
Using the Mitel Web UI, you can specify a scroll delay option that allows you to set the time
delay, in seconds, between the scrolling of each status message on the phone. You can specify
this setting in the Status Scroll Delay (seconds) field at the path Basic Settings > Preferences
> General. The default time is 5 seconds for each message to display before scrolling to the
next message. You can increase or decrease this time as required. Setting and saving the value
in the Mitel Web UI applies to the phone immediately.
CONFIGURING STATUS SCROLL DELAY
1. Click on Basic Settings > Preferences > General.
2. Enter a value in the Status Scroll Delay (seconds) field. Valid values are: 1 to 25 seconds.
Default is 5 seconds.
3. Click Save Settings to save our changes.
MITEL WEB UI