AASTRA 6867I - User Manual
Table Of Contents
- Software License Agreement
- Welcome
- IP Phone Keys
- Getting Started
- Methods of Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line and Call Appearances
- Presence Key
- Configuring Softkeys
- State-Based Softkeys
- Softkey Display Behavior
- Line Key
- Speed Dial Key
- Speed Dial Prefix
- Press-and-Hold to Create a Speed Dial (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Key Using the Speed Dial Edit Option (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Softkey Using the Mitel Web UI
- Creating Dialpad Speed Dial Keys Using the Mitel Web UI
- Do Not Disturb (DND) Key
- Busy Lamp Field (BLF) Key
- BLF/List Key
- Automatic Call Distribution (ACD) Key (for Sylantro Call Managers)
- XML Key
- Flash Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return Key
- Call Forward Key
- BLF/Xfer
- Speed Dial/Xfer
- Speed Dial/Conf
- Speed Dial/MWI
- Directory Key
- Callers List Key
- Redial Key
- Conference Key
- Transfer Key
- Intercom Key
- Phone Lock Key
- Paging Key
- Discreet Ringing Key
- Empty Key
- None Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Additional Features
- Display DTMF Digits
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Switch UI Focus to Ringing Line
- Call Hold Reminder During Active Calls
- Call Hold Reminder (on single hold)
- Call Waiting Tone Period
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- Message Waiting Indicator
- Incoming Intercom Call Features
- Group RTP Paging
- Shared Call Appearance (SCA) Call Bridging
- BroadSoft BroadWorks Executive and Assistant Services
- Star Codes
- Other Features
- Model M680i and M685i Expansion Modules
- Troubleshooting Solutions
- Why is my display blank?
- Why is my speakerphone not working?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new voicemail message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the No Service message?
- How do I change my user password?
- Why does my phone display Bad Encrypted Config?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Limited Warranty (Australia Only)
- Appendix A - Time Zone Codes
Additional Features
197
CALL WAITING TONE PERIOD
You can specify a specific time period (in seconds) for the call waiting tone to play at regular
intervals on an active call using the parameter Call Waiting Tone Period. A value of 0 is the
default and plays the call waiting tone only once on the active call. When the incoming caller
hangs up, the call waiting tone stops on the existing active call.
You can enable or disable this feature in the Mitel Web UI.
CONFIGURING CALL WAITING TONE PERIOD
1. Click on Basic Settings > Preferences > General
2. In the Call Waiting Tone Period field, enter a time period, in seconds, that the call waiting
tone will be audible on an active call when another call comes in. Default is 0 seconds.
When enabled, the call waiting tone plays at regular intervals for the amount of time set
for this parameter. For example, if set to 30 the call waiting tone plays every 30 seconds.
When set to 0, the call waiting tone is audible only once on the active call.
3. Click Save Settings.
MITEL WEB UI