AASTRA 6867I - User Manual

Mitel 6867i SIP Phone Release 4.1.0 SP3 User Guide
210
LED will be lit. When the same Filter softkey is pressed again, Executive Call Filtering for the
applicable Executive will deactivate and the softkey’s corresponding LED will turn off.
Alternatively, a single Filter softkey can be configured without a defined key value. If this is the
case, the Assistant will be able to manually activate and deactivate Executive Call Filtering for
each associated Executive through the phone’s UI. In this scenario, as only one Filter softkey
is utilized, the softkey’s corresponding LED will be lit when Executive Call Filtering is activated
for even one associated Executive. If Executive Call Filtering is disabled for all associated
Executives, the softkey’s corresponding LED will turn off.
Configuring the Filter Key on the Assistant’s Phone Using the Mitel Web UI
Use the following procedure to configure the Filter key on the Assistant’s phone using the Mitel
Web UI:
1. Click on Operation->Softkeys and XML.
or
Click on Operation->Expansion Module Keys.
2. Select a key that you want to use as a Filter activate/deactivate key.
3. In the "Type" field, select "Filter".
4. In the "Label" field, enter a label to apply to this key (e.g. "Filter-Stefan" for a specific
Executive or simply "Filter" for a generic Filter key with no defined value).
5. In the "Value" field, enter the Executive’s phone or extension number (e.g. 4100)
6. In the “Line” field, select the line for which you want to use the key functionality.
7. Repeat Steps 2 to 6 for each respective Executive for whom you would like to assign a
Filter key.
Note: If Call Forward is enabled for filtered calls, LEDs for all Filter softkeys will be turned
off.
MITEL WEB UI
Note: To utilize a single Filter softkey without a defined key value (so that you can
manually activate and deactivate Executive Call Filtering through the phone’s UI)
skip to Step 8.