AASTRA 6867I - User Manual
Table Of Contents
- Software License Agreement
- Welcome
- IP Phone Keys
- Getting Started
- Methods of Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line and Call Appearances
- Presence Key
- Configuring Softkeys
- State-Based Softkeys
- Softkey Display Behavior
- Line Key
- Speed Dial Key
- Speed Dial Prefix
- Press-and-Hold to Create a Speed Dial (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Key Using the Speed Dial Edit Option (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Softkey Using the Mitel Web UI
- Creating Dialpad Speed Dial Keys Using the Mitel Web UI
- Do Not Disturb (DND) Key
- Busy Lamp Field (BLF) Key
- BLF/List Key
- Automatic Call Distribution (ACD) Key (for Sylantro Call Managers)
- XML Key
- Flash Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return Key
- Call Forward Key
- BLF/Xfer
- Speed Dial/Xfer
- Speed Dial/Conf
- Speed Dial/MWI
- Directory Key
- Callers List Key
- Redial Key
- Conference Key
- Transfer Key
- Intercom Key
- Phone Lock Key
- Paging Key
- Discreet Ringing Key
- Empty Key
- None Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Additional Features
- Display DTMF Digits
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Switch UI Focus to Ringing Line
- Call Hold Reminder During Active Calls
- Call Hold Reminder (on single hold)
- Call Waiting Tone Period
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- Message Waiting Indicator
- Incoming Intercom Call Features
- Group RTP Paging
- Shared Call Appearance (SCA) Call Bridging
- BroadSoft BroadWorks Executive and Assistant Services
- Star Codes
- Other Features
- Model M680i and M685i Expansion Modules
- Troubleshooting Solutions
- Why is my display blank?
- Why is my speakerphone not working?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new voicemail message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the No Service message?
- How do I change my user password?
- Why does my phone display Bad Encrypted Config?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Limited Warranty (Australia Only)
- Appendix A - Time Zone Codes
Additional Features
215
A checkmark will be displayed beside the Executive indicating Executive Call Filtering is
to be activated.
3. Press the Save softkey.
To Deactivate Executive Call Filtering on an Assistant’s Phone when the Filter Key’s
Value is Defined
Use the following procedure to deactivate Executive Call Filtering on an Assistant’s phone when
the Filter key’s value is defined:
1. Press the configured “Filter” key corresponding to the respective Executive.
Executive Call Filtering is now deactivated for that Executive and the key’s corresponding
LED will turn off.
To Deactivate Executive Call Filtering on an Assistant’s Phone when the Filter Key’s
Value is Not Defined
Use the following procedure to deactivate Executive Call Filtering on an Assistant’s phone when
the Filter key’s value is not defined:
1. Press the “Filter” key.
The list of associated Executives will appear on screen.
2. Select the Executive for whom you want to deactivate Executive Call Filtering by pressing
the 5 or 2 navigation keys and then pressing the button.
The checkmark will be removed beside the Executive indicating Executive Call Filtering is
to be deactivated.
3. Press the Save softkey.
Notes:
1. The LED corresponding to the “Filter” key will be lit if Executive Call Filtering is
activated for any associated Executive. The LED will turn off if Executive Call
Filtering is deactivated for all associated Executives.
2. If Call Forward is enabled for filtered calls, the LED for the Filter softkey will be
turned off
IP PHONE UI
Note: If Call Forward is enabled for filtered calls, LEDs for all Filter keys will be
turned off.
IP PHONE UI
Notes:
1. The LED corresponding to the “Filter” key will be lit if Executive Call Filtering is
activated for any associated Executive. The LED will turn off if Executive Call
Filtering is deactivated for all associated Executives.
2. If Call Forward is enabled for filtered calls, the LED for the Filter softkey will be
turned off.