AASTRA 6867I - User Manual
Table Of Contents
- Software License Agreement
- Welcome
- IP Phone Keys
- Getting Started
- Methods of Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line and Call Appearances
- Presence Key
- Configuring Softkeys
- State-Based Softkeys
- Softkey Display Behavior
- Line Key
- Speed Dial Key
- Speed Dial Prefix
- Press-and-Hold to Create a Speed Dial (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Key Using the Speed Dial Edit Option (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Softkey Using the Mitel Web UI
- Creating Dialpad Speed Dial Keys Using the Mitel Web UI
- Do Not Disturb (DND) Key
- Busy Lamp Field (BLF) Key
- BLF/List Key
- Automatic Call Distribution (ACD) Key (for Sylantro Call Managers)
- XML Key
- Flash Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return Key
- Call Forward Key
- BLF/Xfer
- Speed Dial/Xfer
- Speed Dial/Conf
- Speed Dial/MWI
- Directory Key
- Callers List Key
- Redial Key
- Conference Key
- Transfer Key
- Intercom Key
- Phone Lock Key
- Paging Key
- Discreet Ringing Key
- Empty Key
- None Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Additional Features
- Display DTMF Digits
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Switch UI Focus to Ringing Line
- Call Hold Reminder During Active Calls
- Call Hold Reminder (on single hold)
- Call Waiting Tone Period
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- Message Waiting Indicator
- Incoming Intercom Call Features
- Group RTP Paging
- Shared Call Appearance (SCA) Call Bridging
- BroadSoft BroadWorks Executive and Assistant Services
- Star Codes
- Other Features
- Model M680i and M685i Expansion Modules
- Troubleshooting Solutions
- Why is my display blank?
- Why is my speakerphone not working?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new voicemail message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the No Service message?
- How do I change my user password?
- Why does my phone display Bad Encrypted Config?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Limited Warranty (Australia Only)
- Appendix A - Time Zone Codes
Mitel 6867i SIP Phone Release 4.1.0 SP3 User Guide
220
1. Press the Options key and then navigate to the Call Forward menu
or
Press the Call Forward softkey.
2. Press the 2 navigation key until you reach the On checkbox beside the Forward Filtering
number field.
3. Press the button.
The checkmark will be removed indicating call forwarding of all filtered calls is to be
deactivated.
4. Press the Save key to save your changes.
The Call Forward icon will be removed from the idle screen status bar and the MWI
and (if configured) Call Forward softkey LEDs will turn off indicating Forward Filtering is
deactivated.
To Initiate a Call on Behalf of an Executive
Use the following procedure to initiate a call on behalf of an Executive:
1. Press the Speeddial softkey programmed with Initiate Call function (e.g. “Init”).
The phone will enter in the FAC for the BroadSoft Executive-Assistant Initiate Call feature
and automatically dial the FAC call.
2. Follow any audible instructions (depending on the Speeddial key’s configuration you may
be prompted to enter the Executive’s number/extension and/or Destination number/exten-
sion manually using the phone’s keypad).
The phone will automatically dial the Destination number/extension.
3. When the call is answered, if you would like to push the call to the Executive, press the
Push key.
The phone will enter in the FAC for the BroadSoft Executive-Assistant Call Push feature
and automatically dial the FAC call.
The FAC call will be answered and the filtered call will be released if the push is successful.
STAR CODES
All of the main call handling and extension management features using star codes can be set
on your phone by your Administrator. Contact your System Administrator for more information.
If these have not been set up, you can dial any star code commands on the 6867i phone the
same way you would on a regular telephone.
IP PHONE UI
IP PHONE UI