AASTRA 6867I - User Manual
Table Of Contents
- Software License Agreement
- Welcome
- IP Phone Keys
- Getting Started
- Methods of Customizing Your Phone
- Phone Status
- Customizing Your Phone
- Line and Call Appearances
- Presence Key
- Configuring Softkeys
- State-Based Softkeys
- Softkey Display Behavior
- Line Key
- Speed Dial Key
- Speed Dial Prefix
- Press-and-Hold to Create a Speed Dial (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Key Using the Speed Dial Edit Option (applicable to softkeys, dialpad keys, expansion module keys)
- Creating a Speed Dial Softkey Using the Mitel Web UI
- Creating Dialpad Speed Dial Keys Using the Mitel Web UI
- Do Not Disturb (DND) Key
- Busy Lamp Field (BLF) Key
- BLF/List Key
- Automatic Call Distribution (ACD) Key (for Sylantro Call Managers)
- XML Key
- Flash Key
- Sprecode Key
- Park/Pickup Keys
- Last Call Return Key
- Call Forward Key
- BLF/Xfer
- Speed Dial/Xfer
- Speed Dial/Conf
- Speed Dial/MWI
- Directory Key
- Callers List Key
- Redial Key
- Conference Key
- Transfer Key
- Intercom Key
- Phone Lock Key
- Paging Key
- Discreet Ringing Key
- Empty Key
- None Key
- Making Calls
- Receiving Calls
- Handling Calls
- Managing Calls
- Additional Features
- Display DTMF Digits
- Play Call Waiting Tone
- Stuttered Dial Tone
- XML Beep Support
- Status Scroll Delay
- Switch UI Focus to Ringing Line
- Call Hold Reminder During Active Calls
- Call Hold Reminder (on single hold)
- Call Waiting Tone Period
- Preferred Line and Preferred Line Timeout
- Goodbye Key Cancels Incoming Calls
- Message Waiting Indicator
- Incoming Intercom Call Features
- Group RTP Paging
- Shared Call Appearance (SCA) Call Bridging
- BroadSoft BroadWorks Executive and Assistant Services
- Star Codes
- Other Features
- Model M680i and M685i Expansion Modules
- Troubleshooting Solutions
- Why is my display blank?
- Why is my speakerphone not working?
- Why can’t I get a dial tone?
- Why doesn’t my phone ring?
- Why is the light not coming on with a new voicemail message?
- Why is my handset not working?
- How do I find the IP address of my phone?
- Why does my phone display the No Service message?
- How do I change my user password?
- Why does my phone display Bad Encrypted Config?
- How do I restart the IP phone?
- How do I lock my phone?
- Limited Warranty
- Limited Warranty (Australia Only)
- Appendix A - Time Zone Codes
Mitel 6867i SIP Phone Release 4.1.0 SP3 User Guide
94
configured on the call manager and the “extension number” (an optional value) corresponds
to the target’s extension number.
6. In the Line field, select a line number that is actively registered to the appropriate SIP proxy
you are using. Valid values are:
• global
• 1 through 24
7. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this
softkey.
8. In the BLF List URI field, enter the name of the BLF list defined on the BroadSoft Broad-
Works Busy Lamp field page for your particular user. For example, sip:9@192.168.104.13.
Expansion Module Keys
9. Select from Key 1 through Key 16 (M680i) or Key 84 (M685i).
10. In the "Label" field, enter the name of the person who’s extension you are monitoring.
11. In the "Value" field, enter a value to associate with the softkey or programmable key.
For example, for BLF, the value is the extension you want to monitor.
For BLF/List, enter the BLF/List target’s resource URI, using the following syntax:
sip:username@domain.com;ext=extension number
whereby the “username@domain.com” is identical to the resource URI of the BLF/List key
configured on the call manager and the “extension number” (an optional value) corresponds
to the target’s extension number.
Note: If a resource URI is not defined in the Value field, the key will be automatically
populated using the first resource entry from the BLF/List NOTIFY data that has not
already been populated (either manually or automatically).
Note: The Label and Value field are not required. The BroadWorks BLF/List name is
configured in the BLF List URI field instead.
Note: Contact your System Administrator for the BLF List URI.
Note: If BLF/List type is selected, the label value is optional. If a label is defined it
is displayed on the phone’s screen up until the BLF/List key has been updated by
the call manager. If a label is not defined, the label will be displayed as a series of
question marks (i.e. ???) until it is updated with the appropriate data from the call
manager.
Note: If a resource URI is not defined in the Value field, the key will be automatically
populated using the first resource entry from the BLF/List NOTIFY data that has not
already been populated (either manually or automatically).