Cell Phone User Manual

35
Get creative
01
02
03
04
05
06
07
08
Using the flash
The flash is set to off as default, but there
are other options.
1 Select from the top right corner of
the viewfinder to enter the flash sub-
menu.
2 There are three flash options:
Always on - Your camera will assess the
lighting needed to take a good picture
and use the flash as necessary.
When taking - The camera will flash
twice in order to reduce red eye.
Off - The camera will never flash. This is
useful if you want to save battery power.
3 Select the flash option you’d like to use.
4 When you’ve made your selection the
flash menu will automatically close, ready
for you to take your picture.
5 The flash icon in the viewfinder will
change according to your new flash
mode.
NOTE: Whenever you exit the camera, the
flash setting will revert to the default off
mode. You’ll need to switch the flash back
on if you still need it when you reopen the
camera.
Adjusting the brightness
Contrast defines the difference between
light and dark in an image. A low contrast
image will appear foggy, whereas a high
contrast image will appear much sharper.
1 Select Brightness in Settings.
2 Slide the contrast indicator along the
bar, towards
for a lower contrast,
hazier image or
towards for a higher
contrast, sharper image.
Choosing a shot type
1 Select Settings to open the available
shot types.
2 Choose from the four options:
Normal shot -This is the default shot
type, the photo will be taken in the
normal way, as outlined in taking a quick
photo.
Burst shot - This enables you to take
nine shots automatically in very quick
succession. See Using burst shot mode
on page
37 for details.
Frame shot - Choose from one of the fun
frames to transform your friend into a
pirate or just decorate their surroundings.