Specifications

SpectraLink Corporation Configuring NetLink Wireless Telephones
NetLink Configuration Cradle
Part Number: 72-0175-01-C.doc Page 13
7. Downloading and Uploading Configuration Plans
Once your configuration plans are established, the settings are easily downloaded
into the handsets.
7.1 Downloading a configuration plan to a handset
1. Place a NetLink Wireless Telephone with the Battery Pack removed into the
appropriate slot.
2. Use the toolbar to open the System, Group and User plans for this handset.
3. Enter information unique to the handset – Extension and IP address (if using
static IP). Note that these two fields have a Next button that is useful for setting
these fields when configuring a quantity of handsets.
4. Copy the settings to the Phone settings fields.
5. Click Write Phone to begin the download.
6. You may save the settings unique to this handset by ensuring the correct
extension number or other filename is entered in the User filename field and then
clicking Save. You may also load files or edit settings for the next handset (steps
2 and 3) during the download.
7. When the Active flag turns off, the download has finished and the handset may
be removed from the Cradle.
7.2 Uploading a configuration plan from a handset
1. Place a NetLink Wireless Telephone with the Battery Pack removed into the
appropriate slot.
2. Click the Read Phone button to begin the upload.
3. When the Active flag turns off, the handset’s settings will appear in the Phone
settings fields.
4. You may copy these settings over to the Editable settings fields to use them to
create configuration plans as described above or to save them by user or
extension.