Specifications

SpectraLink Corporation Configuring NetLink Wireless Telephones
NetLink Configuration Cradle
Part Number: 72-0175-01-C.doc Page 6
3. Installing the NetLink Configuration Cradle
Set up the Configuration Cradle by first obtaining the appropriate SpectraLink power
supply for your country or region. Place the Configuration Cradle on a flat,
horizontal surface and plug the power supply into the Configuration Cradle and into
an appropriate wall outlet. Plug a straight-through serial cable into the Configuration
Cradle and into an available serial port on the PC.
Set up a folder for Wireless Telephone configuration on the PC and download the
programming software from the SpectraLink website
Hhttp://www.spectralink.com/service/software.phpH into this folder. Extract the
individual files from the zip and run the PhoneConfig.exe file.
Note that there is no installer or uninstaller since the program does not modify your
system or registry. It runs from its current location and stores its settings locally.
Serial port settings are handled automatically by the Configuration Cradle software.
If necessary, the COM port the Cradle is using can be set in the Settings menu.

USB Serial Adaptors: Some adapters are incompatible with the
Configuration Cradle. Of the adaptors tested by SpectraLink engineering,
two have been found to work:
• Sakar International IConcepts Item #60448
• Keyspan USA-19HS