Specifications

SpectraLink Corporation Configuring NetLink Wireless Telephones
NetLink Configuration Cradle
Part Number: 72-0175-01-C.doc Page 9
configuration in a handset may be copied to the Editable settings area and edited or
saved. The Sys Grp Usr checkboxes allow you to copy just the settings you require.
When clicked, the Read Phone and Write Phone buttons initiate the transfer of
configuration data from or to the handset in the Cradle. The Stop button will halt the
transfer.
The Serial and MAC windows display the serial number and MAC address of the
handset in the Cradle. This information is not stored.
The four labeled flags on the right indicate the status of the configuration transfer:
Active: green when attempting communication with handset in Cradle. Turns
yellow if a timeout occurs (may be due to an improperly seated handset). The
software will repeatedly re-attempt communication after a timeout so re-seating
the handset should correct the problem.
Read: green when information is currently being read from the handset in the
Cradle.
Write: yellow when information is currently being written to the handset in the
Cradle.
Error: red when an error has occurred. An error message will appear on the status
bar at the bottom of the main window.