user manual

Installing
Release 3.3 129
6. Click OK.
7. Click Yes (from the warning).
8. Click OK from the Inheritance Override Window - do not select any nodes.
9. Click Apply.
10. Click OK.
To Set up the Default Web Site:
1. Click Start, point to Programs, point to Administrative Tools, and then click Internet
Service Manager.
2. Select the Default Web Site.
3. Select Action Properties.
4. Select Documents tab.
5. Select Add and Enter default.asp.
6. Move this to the top of the list.
7. Click Apply.
8. Click OK.
Copy the identitydb.obj file
To copy the identitydb.obj file:
1. Open the OPS Client web page.
2. Click Configuration Tool Client Resources.
3. Click the Trusting Configuration Tool Applet.
4. Click on identitydb.obj file.
5. Click Save. Save the file to your local account (Documents and Settings\"name").
Install the 3300 Universal NSU
Install the 3300 Universal NSU
To install the 3300 Universal NSU:
1. Set DIP switch #6 for Network or Line termination mode. The default is network termination
mode. Refer to Universal NSU DIP Switch Settings.
2. Establish a fiber connection from the fiber port on the NSU to the fiber port on the 3300
Controller.
3. Connect the NSU L0 and/or L1 port to the remote system (the PSTN or another system)
by using Category 5 cable.
4. Connect power to the NSU.
Note: The Ethernet port is used for FTP upgrades.
Note: The cable for the CIM ports must be an Ethernet crossover cable.