Product Info

4
Notice to Canadian Customers
IC: 173A-PERS1
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-3 (B)/NMB-3(B).
Avis aux clients canadiens
IC: 173A-PERS1
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
RF Exposure Canada
This device is compliant to the RF exposure requirements in Industry Canada
RSS-102 issue 5.
Exposition RF Canada
Conformité des appareils de radiocommunication aux limites d'exposition
humaine aux radiofréquences (toutes bandes de fréquences)
Notice to U.S. Customers
FCC ID: EHTPERS1
US:BN2IPNANPERS1
The FCC Part 68 DoC can be found at the following internet address: http://
www.mitel.com/legal/regulatory-declarations.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: Changes or modifications not expressly approved by Mitel
Networks ™ Corporation may void the user’s right to operate the equipment.
The handset provided with this equipment is hearing aid compatible.
This equipment is not for connection to the telephone network or public coin
phone service. It is only for use when connected to Mitel systems.
WHEN PROGRAMMING EMERGENCY NUMBERS AND (OR) MAKING
TEST CALLS TO EMERGENCY NUMBERS
• Remain on the line and briefly explain to the dispatcher the reason for the
call.
• Perform tests during off-peak hours such as early morning or late
evenings.
Refer all servicing to a Mitel authorized repair facility. If you require a Mitel
return authorization number, or information on obtaining service or repairs,
please contact Mitel at the following telephone number: 1-800-722-1301. A
Mitel return authorization number must be obtained before sending
equipment to the Mitel repair facility:
Mitel Networks
2160 West Broadway, Suite #103
Mesa, AZ
U.S.A 85202
Email: [e-mail]
ISED Notices (Canada)
''NOTICE: This equipment meets the applicable ISED Terminal Equipment
Technical Specifications. This is confirmed by the registration number. The
abbreviation, IC, before the registration number signifies that registration
was performed based on a Declaration of Conformity indicating that ISED
technical specifications were met. It does not imply that ISED approved the
equipment.”
AVIS: Le présent matériel est conforme aux spécifications techniques
d’ISED applicables au matériel terminal. Cette conformité est confirmée par
le numéro d'enregistrement. Le sigle IC, placé devant le numéro
d'enregistrement, signifie que l’enregistrement s’est effectué conformément
à une déclaration de conformité et indique que les spécifications
techniques d'ISED ont été respectées. Il n’implique pas qu’ISED a
approuvé le matériel.
FOR MOBILE DEVICE USAGE (>20cm/low power)
Radiation Exposure Statement:
This equipment complies with FCC & ISED radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations :
Cet équipement est conforme aux limites d'exposition aux rayonnements FCC
et ISED définies pour un environnement non contrôlé. Cet équipement doit être
installé et utilisé avec une distance minimale de 20 cm entre le radiateur et
votre corps.
FOR COUNTRY CODE SELECTION USAGE (WLAN
DEVICES)
Note: The country code selection is for non-US model only and is not
available to all US model. Per FCC regulation, all WiFi product marketed in
US must fixed to US operation channels only.
Notice to Customers in Australia
• Do not use in areas where there are explosive hazards.
• Do not use a Bluetooth handset in environments where there is a
danger of ignition of flammable gases.
Notice to UK Customers
Hereby, Mitel declares that the 6920
w IP Phone is in compliance with the
relevant statutory requirements. The full text of the UK declaration of
conformity is available at the following internet address:
http://www.mitel.com/legal/regulatory-declarations.
Mitel Networks Limited
2 London Wall Place
4th Floor
London, UK
EC2Y 5AU
Notice to Customers in EU Countries
BT
RF 2400 - 2483 MHz (10mW maximum)
Wifi RF 5180-5825 MHz (100mw maximum)
This transmitter must no be co-located or operating in conjunction with any
other antenna or transmitter.