Specifications

27
Create a Hunt Group
After the IP devices are created and configured to communicate with MCA, you need to create
a hunt group and add the IP phone extensions to it. The hunt group extension is the number
you enter for the dial-in number in System Options (see page 38).
Create a hunt group, and then add members. The members of this hunt group are the extensions
you created previously for the conference extensions; see Create IP Devices for 86xx Ports on
page 26. Do the following:
• Create a hunt group extension number. Leave the Number of Extensions as 1 (default).
• Type a description for the extension, for example, MCA1. Descriptions can contain up to
20 characters and hunt group user names can contain up to 10 characters. Do not use
slash (/), backslash (\), vertical slash ( | ), or tilde (~) characters in user names. Do not use
Control characters in descriptions or user names.
Enable OAI Connection
The Mitel 5000 and MCA communicate using Open Architecture Interface (OAI). You must set
the OAI connection in Database Programming to allow the systems to communicate. Under
Sockets, set System OAI Level 2 to Yes.