Specifications

Configuration and Maintenance Manual
38
Dial-In Phone Number 3 Type the third telephone number assigned to MCA that users dial to join
conferences. This is typically an extension or hunt group number, but it
can be any number used to dial into a conference. This value is included
in the "Dial-In numbers" section of the Meeting Details displayed by the
Mitel Advanced Collaboration Clients and included in the default contents
of the Conference invitation
Dial-In Phone Number 3 Label Type the label associated with the third telephone number. This label is
included in the "Dial-In numbers" section of the Meeting Details displayed
by the Mitel Advanced Collaboration Clients.
International Dialing Prefix Type the digits used before dialing international calls (for example, 011).
This is based on the site where the MCA server is located.
National Dialing Prefix Type the digit(s) required to make domestic toll calls.
Country Code Type the country code of the location where MCA is located. The default
is 1 (for United States).
Webserver Admin Email Type the e-mail address of the system administrator. Web server alerts
are sent to this address.
Outgoing Prefix Type the number used by the communications platform (switch) to seize
a CO trunk for outgoing calls. This prefix is pre-pended to the digits when
the number dialed by a user is greater than the Max Extension Length.
When Enable DAS Rules is set this setting is not applicable.
Max Extension Length Type the maximum number of digits MCA should use to determine an
extension. If the number dialed is more than the maximum length, MCA
sees it is an external call and appends it to the Outgoing Prefix.
When Enable DAS Rules is set this setting is not applicable.
Enable DAS Rules Set this option if DAS rules apply to MCA; the DAS Rules option shows in
the navigation pane. The normal default for this option is cleared, but set
for an IAWC to MCA migration. See Configuring Dial Access String (DAS)
Rules on page 47.
Active Speaker Indication Set this option to allow the audio conference leader to view the current
speaker in the conference. When set in System Options, the leader can
set or clear this feature for each audio conference. The default for this
option is set.
Default Caller ID Type the caller ID that is provided by MCA to the Public Switched
Telephone Network (PSTN) on outgoing calls.
Always use Default Caller ID Set this option to always use the default caller ID option above for all
outbound calls. Otherwise, the Caller ID of the first party in a call will be
used (if available), or each party will see the other’s Caller ID.
General Alarm Email Type the e-mail address of the person who gets notified of general alarms
(typically the system administrator).
General Alert Email Type the e-mail address of the person who gets notified of general alerts
(typically the system administrator).
Port Usage Notification Threshold Type the number of concurrent ports being used on MCA, so that when
this value is reached, an alert e-mail is sent to the e-mail address specified
in the Alert Email box when the threshold is reached.
Table 6: System Options Settings (continued)
Option Description
(Sheet 2 of 4)