Specifications

Executive Ports Type the number of audio ports on the system you want to reserve for the

exclusive use of conferences created by executive users. If the number of

Executive Ports is non-zero, when someone joins a conference created by

a non-executive user, the number of ports available is decreased by the

number of Executive Ports. See Editing a User Profile on page 58 for

information on how to configure a user to be an executive user.

Note: Executive port settings are disregarded when Port Reservations is

selected.

Prompts Language Select from the list the language that is used for the audio voice prompts.

Custom Language 1 and Custom Language 2 are used for selecting a

language other than those provided in the prompts list. For additional

information, see Configuring Voice Prompts on page 42.

Conference URLs Select whether conference URLs will be protected (encrypted) by SSL

(https) or not protected (http). If you select https, be sure that port 443 is

open on any firewall placed between MCA and the Internet.

Document Timeout Type the length of time that documents uploaded to the MCA will remain

after a conference has expired. MCA periodically deletes documents that

remain past this time-out period.

User Login Timeout Type the period of time of user inactivity before a browser session with

MCA is automatically terminated. Because a session may remain open

during a conference, and because that session may be used for call

control at some point well after that call has started, this should be set long

enough so that users will not be logged out during a conference. It should

be set short enough so that an open session does not constitute a

potential security issue. The default is 8 hours.

Custom Access Codes Allowed Select this option to enable custom access codes to be created when

setting up conferences.

Minimum IVR Access Code Length Cannot be changed from the default value of 7. Reserved for future use.

Use HTTPS Only Select this option to force a secure connection for users that access the

conference. This setting overrides the Conference URLs setting.

Note: You must set Use HTTPS Only for MCA hyperlinks to work when

MAS is configured in LAN mode (see Figure on page 16) with a Mitel

Multi-protocol Border Gateway (MBG) Web Proxy. For more information

about the MBG Web Proxy, refer to the MAS documentation located on

the Mitel Web site (http://edocs.mitel.com).

Platform Select the communication system being used with this installation of Mitel

Collaboration Advanced.

Dial 1 to join outbound calls When selected, a user added to the conference call is prompted by the

system to press 1 to join the conference. The user must respond correctly

within the specified time or the system drops the outgoing call attempt.

Table 6: System Options Settings (continued)

Option Description

(Sheet 3 of 4)