Specifications

Configuration and Maintenance Manual

4. This page shows progress of the migration and it is automatically refreshed while the data

is being restored. After the data is restored, a status message on the page will indicate if

the migration was successful. If for any reason a portion of the data is not restored, it is

indicted by a red X along with a brief description.

After you restore the IAWC data on MCA, the MCA server will restart automatically. Do the

following:

• Configure Web Conferencing settings, see page 34.

• Verify System Options settings are correct, see page 36.

• Configure SIP server for the system connected to MCA, see page 50.

• If applicable, restore any custom logos (see page 46), prompts (see page 43), or mu-

sic-on-hold files (see page 44).

Configuring SIP Server

The signaling protocol used between the communications platform and MCA is SIP. MCA

supports multiple Mitel communication platforms. The platform you select in System Options

(see page 36) determines which SIP Server page appears when you select Configure SIP

Server in the navigation pane.

Configure SIP Server – MCD

Use these settings only when configuring MCA with a MCD system. Configure the MCD system

first, and then configure the SIP server. See Configure the Mitel Communications Director

(MCD) on page 24 for details.

After you configure the MCD system for MCA, configure SIP Server settings in MCA using the

account information from the MCD system configuration.

To configure the SIP component for a Mitel 3300 (Mitel Communications Director):

1. From the MCA administrator page, click System Options in the navigation pane.

2. Select Mitel 3300 from the Platform list options.

3. Click Save, and then click Ok at the prompt to restart MCA.

4. From the MCA administrator page, click Configure SIP Server in the navigation pane. The

Mitel 3300 SIP Server Configuration page appears.