Specifications

Configuration and Maintenance Manual
52
To configure the SIP component for a Mitel 5000:
1. From the MCA administrator page, click System Options in the navigation pane.
2. Select Mitel 5000 from the Platform list options.
3. Click Save, and then click Ok at the prompt to restart MCA.
4. From the MCA administrator page, click Configure SIP Server in the navigation pane. The
Mitel 5000 SIP Server Configuration page appears.
5. Type the following information:
• Extension First: Type the extension number of the first IP device used by the MCA
server to register itself with the Mitel 5000.
• Extension Last: Type the extension number of the last IP device used by the MCA
server to register itself with the Mitel 5000.
• Node Number: Type the node number of the Mitel 5000 that is connected to MCA. If
the Mitel 5000 is configured as a single node, type 1, which is the default of the Mitel
5000.
• 5000 IP Address: Type the IP address of the Mitel 5000 system. If the system is
configured as a Mitel 5600, type the IP address of the Base Server.
• OAI IP Address: Type the IP address of the server that provides OAI and SIP for the
Mitel 5000.
• If the system uses a CT Gateway, type the IP address of the of the gateway.
• If the system has a PS-1, type the IP address of the PS-1.
• If the system does not have a PS-1, type the same IP address you entered for Mitel
5000.
• OAI Port: Type the port number used on the Mitel 5000 for OAI. The default value is
4000.
• OAI Password: Type the password used to connect to OAI.