Specifications

59
2. Modify the following information:
• New Password: Indicates the password used to log on to the conference bridge. Type
information in this box only when you want to change the password for this user.
• Registered Phone: Indicates the telephone number of the user that MCA will call when
calling out to the User ID.
• Dial out allowed: Indicates this user can dial out (CO call) to others using the system.
The default is selected.
• Deny multiple leaders: Indicates this user may not have multiple callers using the
leader access code on conference calls. The default is cleared.
• Executive: Conferences created by Executive users have access to audio ports re-
served as executive ports. See Configuring System Options on page 36 to configure
Executive Ports. The default is cleared.
• Reservationless calls: Specifies the option selected for reservationless calls. Reser-
vationless conferences may last as long as the value for Maximum Length of
Reservationless and Recurring Conferences, which is set in Configuring the Default
User Settings on page 66. Select from the following three options:
• Reservationless calls allowed, leader not required: (Default) This user can make
reservationless calls and a leader is not required to be present in the call for the call
to start.
• Reservationless calls allowed, leader required: This user can make reservationless
calls, but a leader is required to be present in the call for the call to start.
• Reservationless calls not allowed: This user cannot make reservationless calls.
• Email Type: Specifies the e-mail type the user sends for invitations to a conference.
Select either of the following e-mail types:
• Generic Long: Use this setting for e-mail clients (for example, Microsoft
®
Outlook
®
)
that allow for long form inserts (usually more than one line).
• Generic Short: Use this setting for e-mail clients that only allow short form inserts
(usually one line).
3. Click Save Changes, and then click Ok at the prompt.