Specifications

Configuration and Maintenance Manual

Configuring the Default User Settings

When initially provisioned, all users are given the same set of user settings and permissions.

This configuration is called the Default User Settings. You can set the defaults for all users on

MCA.

To view or edit the default user settings:

1. From the MCA administrator page, click Default User Settings in the navigation pane.

2. Set the following options:

• Dial Out Allowed: Indicates this user can dial out to others using MCA (CO call). The

default setting is selected.

• Deny Multiple Leaders: Indicates this user may not have multiple callers as the con-

ference leader. When selected, only the first person that enters the leader access code

is the conference leader. Subsequent users that enter the leader access code will join

the conference as a participant. The default setting is cleared.

• Reservationless Calls: Select one of the following three options:

• Reservationless calls allowed, leader not required: (default) The user can make

reservationless calls and a leader is not required to be present on the call for the

call to start.

• Reservationless calls allowed, leader required: The user can make reservationless

calls, but a leader is required to be present on the call for the call to start.

• Reservationless calls not allowed: The user cannot make reservationless calls.

• Maximum Length of Reservationless and Recurring Conferences: Indicates this

is the number of weeks in which these conference types can occur. The default setting

is 26 weeks.

• Email Type: Select either of the following e-mail types:

Note: To preserve ports on the server for one-time and recurring conferences,

Mitel recommends that you do the following when you select Enable Port

Reservations (see page 35):

•Select Reservationless Calls Not Allowed for the Reservationless Calls option.

• Make sure the Allow user to schedule conference if conflict occurs option is not

selected under Port Reservations (see page 35).