Specifications

SX-200 ICP General Information Guide
114
Call Forwarding -
Toggle Keys
Feature keys may be programmed as toggle keys for Call Forwarding - Always, Call
Forwarding - Busy, Call Forwarding - No Answer, or Call Forwarding - Busy/No Answer. The
toggle keys allows you to direct your call forwarding temporarily to another destination with
a touch of a button. You may toggle back and forth between one forward destination and
another without having to reprogram the call forwarding.
The SX-200 ICP also supports tenant-based call forwarding. This allows the installer to
assign common call forwarding destinations for Call Forwarding - Busy and Call Forwarding
- No Answer to tenant groups in CDE Form 19.
Call Logging Provides the telephone user with a log showing a list of all the calls to their telephone set.
The log includes all calls answered and not answered, as well as, calls forwarded to another
destination. The user can press the Call softkey to return the call. Call Logging is available
for multiple appearances of DTS and CO line keys.
Call Monitor Call Monitoring allows a user to listen in on calls. During a call monitor, the system gives the
monitoring set a one-way audio path preventing the monitored user and the caller from
hearing the monitoring user.
Call Park from
Single-line Sets
allows users of single-line telephones to put a call on hold (parked) and then replace the
handset. The call may be retrieved at the extension at which the call was parked, or from
any other extension in the system. If Music-on-Hold is available, the parked party hears
music. The parking extension may not originate or receive new calls until the parked call is
retrieved. It can only access paging equipment.
Call Park from
Multi-line Sets
Allows you to park a call from your prime line. After you park a call you can make or accept
other calls from your prime line.
Call Park -
Destination
Phone
Allows the called party to park an answered call on another phone. If a parked call is not
retrieved after a specified length of time, a reminder occurs, if programmed.
Call Park - Fixed
Keys
<<need description>>>
Call Park System
Orbit
Allows you to park up to 25 calls in a parking orbit (auto-selected by the system) from any
line on your display set or console. Your display shows the park access code and the orbit
number. You can then page and inform the paged party where they can retrieve the call.
After you park the call, your line is free to make or accept other calls.
Call Park System
- Specific Orbit
Allows the called party to park a call in a specific orbit by entering a two-digit (01-25) orbit
number or by pressing a feature key assigned to a specific orbit number. You can retrieve
a call from orbit from any phone or attendant console.
Call Rerouting Different types of calls can be routed to different answering points in DAY, NIGHT1, and
NIGHT2 service for each tenant. Rerouted calls are processed differently than normal calls.
The system considers rerouted calls to be important calls that must get through.
Callback Allows the system to notify a caller when a busy device becomes free or when a set has
been used after a no answer condition was encountered
Callback - Busy Allows a user who has encountered a busy destination (set, hunt group, or trunk group) to
have the call completed when the destination becomes idle.
The system continuously
monitors the originating set or console and the destination. When the originating
set is idle and the call can be completed, the system calls the originating set. When
that set or console answers, it calls the destination.
Table 6: Features supported by SX-200 ICP (continued)
Feature Description
Page 11 of 42