Instruction manual

Mitel TELink 700 FLASH 2 06/2009
FCC Notice
WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when this equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at his/her
own expense.
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus
set out in the Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de la Class A prescrites dans le Règlement sur le brouillage radioélectrique édicté par le
ministère des Communications du Canada.
Limited Warranty{tc \l1 "LIMITED WARRANTY}
TERMS: Mitel warrants to the original purchaser ("Buyer") that the Product sold is free from defects in
material and workmanship at the time of purchase. The warranty extends five (5) years from the date
of original purchase and covers parts and labor. Buyer must provide written notice to Mitel within the
warranty period of any defective part or conditions. If the defect is not the result of improper use,
service, maintenance or installation, and if the equipment has not been otherwise damaged or modified
after shipment, Mitel or its authorized representative shall either replace or repair the defective Product
at Mitel‘s option. No credit shall be allowed for work performed by Buyer or unauthorized parties. Out-
of-warranty repairs will be invoiced at the current Nel-Tech hourly rate plus the cost of parts, shipping
and handling. IN THE EVENT THAT THE PRODUCT SERIAL NUMBER IS MISSING OR HAS BEEN
TAMPERED WITH IN ANY WAY, THE FOREGOING WARRANTY IS VOID AND WITHOUT EFFECT
AND MITEL SHALL HAVE NO LIABILITY WHATSOEVER ON ACCOUNT OF DEFECTS TO SUCH
PRODUCT.
LIMITATIONS: EXCEPT AS STATED ABOVE, THERE ARE NO WARRANTIES, EXPRESS OR
IMPLIED, THAT EXTEND BEYOND THE SPECIFICATIONS FOR THE PRODUCT. MITEL
EXPRESSLY DISCLAIMS ANY WARRANTY, EXPRESS OR IMPLIED, THAT EQUIPMENT SOLD
HEREUNDER IS OF MERCHANTIABLE QUALITY OR THAT IT CAN BE USED, OR IS FIT FOR ANY
PARTICULAR PURPOSE. BUYER PURCHASES AND ACCEPTS EQUIPMENT SOLELY ON THE
BASIS OF THE WARRANTY HEREINABOVE EXPRESSED. UNDER NO CIRCUMSTANCES SHALL
MITEL BE LIABLE BY VIRTUE OF THIS WARRANTY OR OTHERWISE FOR ANY SPECIAL,
INDIRECT, SECONDARY OR CONSEQUENTIAL DAMAGES TO ANY PERSON OR PROPERTY
ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT.
REPAIRING OR REPLACING PRODUCT: Buyer may obtain the repair or replacement of any eligible
part or equipment covered under this warranty through Mitel only. Buyer is responsible for all shipping
and handling charges in connection with the performance of this warranty. Products returned to Mitel
must be securely packaged to prevent damage in transit, freight prepaid, and insured for replacement
value. A return authorization number assigned by Mitel must be clearly marked on the outside of the
shipping container. Proof of purchase must accompany shipment. Items delivered to Mitel without a
return authorization clearly marked on the outside of the shipping container, and/or without proof of
purchase will be refused. Please contact Mitel at the address and phone number below to receive a
return authorization number and to arrange for the repair or replacement of a flawed part covered by
this warranty. Please indicate the Product's serial number in all correspondence. An authorization
number will not be issued in the absence of a serial number.
Copyright Notice
This manual copyright 1993-2009 All rights reserved. No part of it may be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or machine-readable form without Mitel’s
prior written consent.
Information contained herein is subject to change without prior notification. Mitel provides this manual
without warranty of any kind, express or implied. This user's manual may contain technical and/or
typographical errors.
Printed in the U.S.A