Instruction manual

Mitel TELink 700 FLASH 4 06/2009
1. SYSTEM DESCRIPTION{tc \l1 "1. SYSTEM DESCRIPTION}
The TELink FLASH is a powerful, simple to use messaging system intended for
telephone Messaging On Hold (MOH). Once properly installed, no further interaction
from the user is required. Unlike other MOH products, the TELink FLASH is designed to
be operated remotely by the MOH provider using a central PC Controller. This feature
eliminates the need for tape distribution because all audio information and configuration
settings are downloaded over telephone lines.
Because the unit uses non-volatile FLASH memory, your audio program is safe from
erasure due to power loss for up to 10 years. If power is lost, audio playback resumes
automatically once power is restored. This feature eliminates the need for a battery
backup system.
The TELink FLASH has been designed to accommodate several different installation
needs. The standard installation method allows normal access to the telephone line
while automatically preventing an unintentional disruption of a communication session
between the TELink and the PC Controller.
In a typical installation, the unit is installed directly to the incoming telephone line with no
other telephone equipment connected prior to the TELink. An installation involving a
KSU or PBX may look like what is illustrated below: